Rear indicator bulbs

[fat controller]

My rear nearside indicator is starting to look a bit pale/white - but a quick glance online suggests that the bulb is a clear one and its the lens that gives the colour . Is this the case?

[Gunnark100]

Elsawin gives nothing regarding "amber or orange" - so i belive its clear bulb 12V21W, if its bad lens just replace both sides with yellow bulb and you good! To be 100% sure - just take light off..10min job.

[b206]

I just replaced mine - they are clear and are 921 fitting 16w 12v.

[Gunnark100]

Just double checked in elsawin and it gives 12V16W for reverse light and 12V21W for turnsignal, probably not really matters which one to use(both side atleast the same:).