marty35
20-01-2015, 01:35 AM
hey guys am havin major trouble with my a4 ... it has a miss fire that's really bad at idle and only slightly when driving .. I had it scan'ed with vagcom [registered version ]and came up with this ...
. Address 01: Engine Labels: 03L-906-019-CAG.clb
Control Module Part Number: 03L 906 022 NN HW: 03L 906 019 AL
Component and/or Version: R4 2,0L EDC H20 5483
Software Coding: 0A194012232503080000
Work Shop Code: WSC 00487 210 96677
ASAM Dataset: EV_ECM20TDI03L906022NN A02006 (AU48)
VCID: 7EF31873E102AEEEE6F-802B
1 Fault Found:
8737 - Cylinder 3
P0303 00 [101] - Misfire Detected
Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2r
Fault Frequency: 1
Mileage: 222208 km
Date: 2015.01.19
Time: 22:46:19
Readiness: 0 0 0 0 1
I changed injector no 3 and had it coded in and it still there ... I checked the injector wiring plug voltage and its the same as the other 3 , I then put the original no 3 injector into no 2 and had it codded in and it works fine so I put it back in its own place and I still have a misfire on cylinder 3... where can I go from here am ready to burn it .... thanks marty .. great forum
. Address 01: Engine Labels: 03L-906-019-CAG.clb
Control Module Part Number: 03L 906 022 NN HW: 03L 906 019 AL
Component and/or Version: R4 2,0L EDC H20 5483
Software Coding: 0A194012232503080000
Work Shop Code: WSC 00487 210 96677
ASAM Dataset: EV_ECM20TDI03L906022NN A02006 (AU48)
VCID: 7EF31873E102AEEEE6F-802B
1 Fault Found:
8737 - Cylinder 3
P0303 00 [101] - Misfire Detected
Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2r
Fault Frequency: 1
Mileage: 222208 km
Date: 2015.01.19
Time: 22:46:19
Readiness: 0 0 0 0 1
I changed injector no 3 and had it coded in and it still there ... I checked the injector wiring plug voltage and its the same as the other 3 , I then put the original no 3 injector into no 2 and had it codded in and it works fine so I put it back in its own place and I still have a misfire on cylinder 3... where can I go from here am ready to burn it .... thanks marty .. great forum