Help error after race downpipes fitted-16395-bank 1 camshaft a (intake) retard set point not reached

[leeunderdown]

Hi all,


I'm getting the following error


16395-bank 1 camshaft a (intake) retard set point not reached ( over advanced) P0011-008-implausible signal-intermittent


18010-Power supply terminal 30: voltage too low P1602 -002- lower limit exceeded-intermittent






in vcds and the warning light coming on after having the miltek with no cats downpipes fitted?


I wasn't getting this before having the miltek race pipes (cat less fitted) the ecu has got a jhm remap (awsome ) so I'm after a set of diagnostic instructions please.


I've been told this fault will also show up with any major vacuum leaks????


If it helps the mpg has also started to fluctuate all over the place again, only since the downpipes where fitted. Some time saying 20 mpg, sometimes 198 mpg ?


Is it possible the mechanics have caught or damaged something while fitting the downpipes? As it seems weird I didn't get this fault before?


Not looking to point any fingers, I'm happy to diagnose and fix myself just would like some help please.


Where is best to start, how would I best identify any vacuum leaks?


Many thanks and happy Xmas all

[Crasher]

So a 1.8T engine? When I see this fault code I immediately think low oil pressure as the unit is oil presume actuated and the 1.8T engine is extremely prone to oil pressure issues due to a blocked sump oil pick up.

No, I have just seen your other post and it is a V8.

[leeunderdown]

Thanks crasher but yes 4.2 v8, but like I said only appeared after the downpipes where fitted, strange one

[Crasher]

Well it's an internal engine fault to do with oil pressure to me as there is no electrical "open circuit" fault code.

[leeunderdown]

Hi Crusher,

i read the the diy guide yesterday on fitting the down pipes on the v8 4.2, and it shows various wires and connections going to the bank 1 cam censor which needed to be disconnected, I reckon something may have got pinched or not pushed back correctly, as this happened immediately after they fitted the pipes
what would you advise would be the easiest way to locate the fault?
where would you start and then move along?

I've added the full vcds printout if that helps,

scan since ecu remapped


VCDS-Lite Version: Release 1.2
Wednesday, 24 December 2014, 13:44:59:0




Chassis Type: 8H - Audi Cabrio B6
Scan: 01,02,03,08,09,0F,11,15,16,17,18,26,36,37,45,46,55 ,56,57,63,65,67,73,75,76,77

-------------------------------------------------------------------------------
Address 01: Engine Labels: Redir Fail!
Controller: 8E0 910 560 EM
Component: 5.0 94Oct JHM 0010
Coding: 0011714
Shop #: WSC 79926
VCID: 749B5FD357A3
4 Faults Found:
18010 - Power Supply Terminal 30: Voltage too Low
P1602 - 002 - Lower Limit Exceeded - Intermittent
17981 - Left Engine Mount Solenoid Valve (N144): Open Circuit
P1573 - 004 - No Signal/Communication - Intermittent
17985 - Right Engine Mount Solenoid Valve (N145): Open Circuit
P1577 - 004 - No Signal/Communication
16395 - Bank 1: Camshaft A (Intake): Retard Setpoint not Reached (Over-Advanced)
P0011 - 008 - Implausible Signal - Intermittent
Readiness: 0000 1000


-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 8E0-614-517.LBL
Controller: 8E0 614 517 Q
Component: ABS/ESP allrad 3033
Coding: 04595
Shop #: WSC 00672
VCID: 361FA5DB015F
1 Fault Found:
18258 - Powertrain Data Bus: Missing Message from ECU
P1850 - 35-10 - - - Intermittent


-------------------------------------------------------------------------------
Address 08: Auto HVAC Labels: 8E0-820-043.LBL
Controller: 8E0 820 043 AB
Component: A4 Klimaautomat 1323
Coding: 00100
Shop #: WSC 00672
VCID: 61B52687F851
No fault code found.


-------------------------------------------------------------------------------
Address 09: Cent. Elect. Labels: 8E0-907-279-8E2.LBL
Controller: 8E0 907 279 F
Component: int. Lastmodul RDW 0517
Coding: 00011
Shop #: WSC 00672
VCID: 351DA2D71C59
No fault code found.


-------------------------------------------------------------------------------
Address 15: Airbags Labels: 8H0-959-655-84.LBL
Controller: 8H0 959 655 B
Component: Airbag 8.4EC 2015
Coding: 0010104
Shop #: WSC 00672
VCID: 3905AEE73041
No fault code found.


-------------------------------------------------------------------------------
Address 16: Steering wheel Labels: 8E0-953-549.LBL
Controller: 8E0 953 549 S
Component: Lenksáulenmodul 0611
Coding: 01011
Shop #: WSC 00672
VCID: 43F9CC0F428D
No fault code found.


-------------------------------------------------------------------------------
Address 17: Instruments Labels: 8E0-920-9xx-8E2.LBL
Controller: 8H0 920 980 L
Component: KOMBI+WEGFAHRS. RB4 D22
Coding: 01401
Shop #: WSC 01158
VCID: 3803ABE30B4B
WUAZZZ8H14K900396 AUZ6Z0C0463204
1 Fault Found:
01314 - Engine Control Module
49-10 - No Communications - Intermittent


-------------------------------------------------------------------------------
Address 26: Auto Roof Labels: 8H0-959-255.LBL
Controller: 8H0 959 255
Component: VSG B6 CABRIO 6286
Coding: 0000000
Shop #: WSC 00672
VCID: F399DCCFD2AD
1 Fault Found:
00532 - Supply Voltage B+
002 - Lower Limit Exceeded - Intermittent


-------------------------------------------------------------------------------
Address 45: Inter. Monitor Labels: 8E0-951-177.LBL
Controller: 8H0 951 178
Component: Innenraumueberw. 0411
Coding: 00001
Shop #: WSC 00000
VCID: EF91D0BFBE85
No fault code found.


-------------------------------------------------------------------------------
Address 46: Central Conv. Labels: 8E0-959-433-MAX.LBL
Controller: 8H0 959 433 F
Component: Komfortgerát T3B 3220
Coding: 06795
Shop #: WSC 00672
VCID: 3701A8DF0655
1 Fault Found:
01134 - Alarm Horn (H12)
29-00 - Short to Ground


-------------------------------------------------------------------------------
Address 55: Xenon Range Labels: 4Z7-907-357.LBL
Controller: 4Z7 907 357
Component: dynamische LWR D09
Coding: 00070
Shop #: WSC 00672
VCID: 047B0F130703
No fault code found.


-------------------------------------------------------------------------------
Address 56: Radio Labels: 8E0-035-1xx-56.LBL
Controller: 8E0 035 186 M
Component: concert II GRO 0001
Coding: 13003
Shop #: WSC 00672
VCID: 311596C7E831
No fault code found.


-------------------------------------------------------------------------------
Address 63: Entry Assist,D Labels: None
Controller: 8H0 959 760 A
Component: EasyEntry F H12 X024
Coding: 00005
Shop #: WSC 00065
VCID: 351DA2D71C59
No fault code found.


-------------------------------------------------------------------------------
Address 73: Entry Assist, P Labels: None
Controller: 8H0 959 760 A
Component: EasyEntry BF H12 X024
Coding: 00005
Shop #: WSC 00065
VCID: 351DA2D71C59
1 Fault Found:
00668 - Supply Voltage Terminal 30
07-10 - Signal too Low - Intermittent


End --------------------------------------------------------------------------------------------------