PDA

View Full Version : Please Help Vent Selection wrong



ian.milling
11-09-2014, 09:51 AM
Hi

When selecting which vents for the heater, i.e. directing to defrost or body or feet vents. The selection doesnt match what I am getting. I can get air out of all the vents but it is wrong.
Basically the selector doesn't match where the air is flowing.

The dash has been removed and new fitted due to airbag deployment, pretty sure its related to this, I just don't know how the selector works. After a bit of info before diving in??

Cheers

vespa
11-09-2014, 02:10 PM
Hi

When selecting which vents for the heater, i.e. directing to defrost or body or feet vents. The selection doesnt match what I am getting. I can get air out of all the vents but it is wrong.
Basically the selector doesn't match where the air is flowing.

The dash has been removed and new fitted due to airbag deployment, pretty sure its related to this, I just don't know how the selector works. After a bit of info before diving in??

Cheers
If the airbag was done for YOU then take it back to the garage who id it and tell them to fix it FOC

ian.milling
11-09-2014, 03:16 PM
had the dash off today working on the airbag module (had it coded to car) so whilst it was off i had a look. The selector works by turning the valve direct via a spring like cable, this must be in the wrong position, unfortunately i didnt pay attention and didnt know where the air was blowing when i switched it off, so now i cant set it to the correct position! doh!!

Know how to sort it though! just need time!