Q7 lower front lower arm

[h2bnd]

Just wondering if anyone has fitted a lower arm them self, apart from the wheel angle adjuster on the bolts is there anything I need to be aware of. Play in bottom ballpoint was noted at last mot but whilst changing pads today noticed the play and realise it's time to change, any advice would be grateful as wonder if this is to much to attempt on drive on my own.


Sent from my iPhone using Tapatalk

[h2bnd]

All done, new lemforder arm from euro car parts £212. Fitted on driveway took about 2 hours.

[Jim Walker]

Was there any special tools needed to complete this? Just as a matter of interest.

[h2bnd]

Hello, no special tools needed
trolly jack and stands
21mm spanner and socket 19 mm socket and breaker bar
hammer and punch to knock pins out
lever bar
I used a centre punch to mark position of adjusters before dismantling
i didn't even need a ball joint splitter