Rns-d upgrade to Rns-e

[eamo]

Hi guys

apols if this has been covered but I can't seem to get a definitive answer

i have a 2003 allroad which I have replaced my rns-d with a 2010 rns-e unit part number 4b0035192p hardware version H99 software version 650

the unit is installed as per this guide http://www.f1computers.force9.co.uk/Downloads_Audi/RNS.pdf but this is for a symphony unit

the wiring for can h and can l is already in place for both connectors

the problem I am having is that the unit won't power off or on using the ignition. I have to manually power the unit off and on. Also the buttons on the unit don't light up at night and I don't get any information from the rns-e on the DIS

any one got any ideas?

thanks

[adamss24]

That's a bit unusual being such a late model but you need a can bus adapter/simulator...

[eamo]

That's a bit unusual being such a late model but you need a can bus adapter/simulator... not sure what ya mean boss. Can you explain a bit more?

[adamss24]

I can get you one if you need, do you have Bose or not ?

[eamo]

I can get you one if you need, do you have Bose or not ?

that at would be great. No I don't have Bose

btw what is a can bus adapter? is it easy install?

sorry meant to say this is the only time from all the reading i have done on various sites that I have read that an adapter is required

[eamo]

here is a the correct link to the earlier post

http://www.f1computers.force9.co.uk/Downloads_Audi/RNS.pdf