smilson
16-04-2014, 05:03 PM
Hello people...
Recently got an A6 sport 52 plate and put a few niggly problems to bed.
Now I have a new problem and really could do with some help and advice.
Went out in the car yesterday and when I went to get out of the drivers door the door would not open. Tried from both inside and outside with no joy, tried locking car with key and central locking still not working. Read somewhere that the deadlock sticks so tried to hit around the area while opening handles etc and still not working.
Decided door panel had to come off so managed to pry away at top with small damage. All mechanisms working on both handles and neither had come off. Had to then smash the lock in half to open car door, removed window section and old broken lock.
Went to scrap yard and got second hand lock. At this point I suspected it was just the lock that was at fault as it was full of rust etc... Fitted new lock and window back etc, door opens and closes fine. Fired central locking and now car wont bloody open again. Door card still out etc.
I suspect its the wiring that is firing the lock and not un firing it. All sounds like it is working but can't be. When I press the unlock button I get a double click as if something is not working. All other doors working fine.
Is there a way to link out the dead lock part of the door or bypass it?
Don't want to have to smash another lock to get the door open to inspect the wiring loom.
Any advice appreciated had a very frustrating day!
Regards.
Steve.
Recently got an A6 sport 52 plate and put a few niggly problems to bed.
Now I have a new problem and really could do with some help and advice.
Went out in the car yesterday and when I went to get out of the drivers door the door would not open. Tried from both inside and outside with no joy, tried locking car with key and central locking still not working. Read somewhere that the deadlock sticks so tried to hit around the area while opening handles etc and still not working.
Decided door panel had to come off so managed to pry away at top with small damage. All mechanisms working on both handles and neither had come off. Had to then smash the lock in half to open car door, removed window section and old broken lock.
Went to scrap yard and got second hand lock. At this point I suspected it was just the lock that was at fault as it was full of rust etc... Fitted new lock and window back etc, door opens and closes fine. Fired central locking and now car wont bloody open again. Door card still out etc.
I suspect its the wiring that is firing the lock and not un firing it. All sounds like it is working but can't be. When I press the unlock button I get a double click as if something is not working. All other doors working fine.
Is there a way to link out the dead lock part of the door or bypass it?
Don't want to have to smash another lock to get the door open to inspect the wiring loom.
Any advice appreciated had a very frustrating day!
Regards.
Steve.