Esp sensor g419 replacement help needed

[Aqib Khan]

hi guys
i plugged in vcds and these are the fault codes i received

Address 01: Engine Labels: Redir Fail!
Part No SW: 03G 906 016 GC HW: 03G 906 016 GC
Component: R4 2,0L EDC G000CG 9887
Revision: --H02--- Serial number:
Coding: 0000076
Shop #: WSC 00654 210 91806
VCID: 6ADB2423458A324E2A7-803F


1 Faults Found:
006215 - Please check DTC Memory of ABS Controller
P1847 - 000 -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 6
Fault Frequency: 85
Reset counter: 255
Mileage: 230102 km
Time Indication: 0
Date: 2014.03.29
Time: 16:40:12


Freeze Frame:
RPM: 0 /min
Speed: 0.0 km/h
Load: 0.0 %
Voltage: 11.70 V
Bin. Bits: 00101000
Torque: 0.0 Nm
Bin. Bits: 00000100


-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 4F0-910-517.lbl
Part No SW: 4F0 910 517 K HW: 4F0 614 517 K
Component: ESP 8.0 front H05 0090
Revision: 00000000 Serial number: 00000000000000
Coding: 0020856
Shop #: WSC 02325 785 00200
VCID: 2C57E23B8FFEEC7E18B-8079


1 Fault Found:
00493 - ESP-Sensor Unit (G419)
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 2
Fault Frequency: 3
Reset counter: 153
Mileage: 230908 km
Time Indication: 0
Date: 2005.09.21
Time: 18:46:29


Freeze Frame:
Hex Value: 0x0000
Hex Value: 0x0282
Hex Value: 0x0043
Hex Value: 0x018F
Hex Value: 0x00FF


i wish to install the esp sensor myself. I have found one second hand on ebay and it is part number 4f0-907-637. I am wondering if this is the correct part replacement for my esp sensor
By the way i have an audi a6 2006 2.0 tdi
and i understand that the esp sensor is under the centre console
My question is that how do i use vcds to check measuring value blocks to check the wiring between j104 and the esp sensor
and my second question is upon replacing the esp sensor with the second hand one from ebay, do i need to calibrate it and if so how do i calibrate it?
would i need to calibrate the steering sensor aswell even though i am not replacing it
please can someone help me with this

[Guest 2]

Are you having any issues? Which version of vcds are you using?


Sent from my iPhone using Tapatalk

[Aqib Khan]

thank you for replying
I'm using the latest version of vcds i believe, 12.12
Im not having any issues when i drive the car, well i haven't noticed any but the esp fault warning comes on every time i start the car and the traction control light is always on as well and it has been doing this for the past year so i thought that i would try to fix it.. i just need help on how to fix it

I went o holiday and then when i came back, the cars brakes had like frozen so after i eventually got them free by trying to move the car back and forward and revving the car, the cars brakes got free but since then the esp fault warning has been occurring every time i start the car

[MarkTM]

Had something similar on the Jag which led to an ABS/ESP fault, wasn't any sensor but the ABS ECU itself which needed to be reworked (£150 with a lifetime warranty) at a place in Wales.

Naturally always go with the cheapest option to fix which may be the sensor, or not.

Am assuming you cleared the DTC's?

[Guest 2]

00493 - Ross-Tech Wiki (http://wiki.ross-tech.com/wiki/index.php/00493)

Look at that. I would advise buying new parts from Audi and getting a specialist to do the work.

[Aqib Khan]

Yes i cleared the DTC's but they appear as again as soon as i start the car

[Aqib Khan]

i have looked at that
and that is why i am asking what measuring blocks i need to check and how to check them