PDA

View Full Version : MIL warning light after cleaning EGR 1.9 BKC



dan54
17-10-2013, 06:52 PM
Hi guys,

As above. I recently cleaned my EGR and ASV as there clogged up badly at only 63000 miles.

Once I refitted everything back correctly and started up, I reset the code, took the car for a short drive came back, switched engine off and then back on again and the MIL light reappeared.

I used a free program on my laptop, connected to the car via the OBDII connector and was given the fault code 'P2425' which with some research is defined as "EGR Cooler valve / Open"

I have no idea what this is relating to as I never tampered with EGR cooler and the only plug I disconnected was the one attacged to the ASV.

Any help with this would be appreciated :biggthump

Thanks,

Daniel

dan54
31-10-2013, 06:38 PM
Fitted new vacuum solenoid block today, fault code still present.