View Full Version : Wheel spacers
Lukenkarl
13-08-2013, 07:49 PM
Has anyone fitted wheel spacers on 19" alloys?
:dunno:
Guest 2
13-08-2013, 07:56 PM
I'm pretty sure JimC64 has spacers on his.
bops6
13-08-2013, 08:29 PM
Just make sure you use hubcentric spacers
as400
17-02-2016, 08:36 PM
Was having a boy racer moment and also thinking about doing this to give that certain look.
Wonder what sort of size would be good without it looking chav?
2cm push, would that be too much?
Having been looking at these 15mm versions....hope the bolt length they supply is appropriately longer?
4 X 15MM HUBCENTRIC ALLOY WHEEL SPACERS FIT AUDI A6 S6 94-97 TDI V6 TFSI QUATTRO | eBay (http://www.ebay.co.uk/itm/4-X-15MM-HUBCENTRIC-ALLOY-WHEEL-SPACERS-FIT-AUDI-A6-S6-94-97-TDI-V6-TFSI-QUATTRO-/171649925618?fits=Car+Make%3AAudi%7CModel%3AA6%7CC ars+Year%3A2007%7CPlat_Gen%3A4F2%2C+C6&hash=item27f72201f2:g:~IsAAOSwzrxUvoCY)
bops6
17-02-2016, 11:19 PM
Was having a boy racer moment and also thinking about doing this to give that certain look.
Wonder what sort of size would be good without it looking chav?
2cm push, would that be too much?
Having been looking at these 15mm versions....hope the bolt length they supply is appropriately longer?
4 X 15MM HUBCENTRIC ALLOY WHEEL SPACERS FIT AUDI A6 S6 94-97 TDI V6 TFSI QUATTRO | eBay (http://www.ebay.co.uk/itm/4-X-15MM-HUBCENTRIC-ALLOY-WHEEL-SPACERS-FIT-AUDI-A6-S6-94-97-TDI-V6-TFSI-QUATTRO-/171649925618?fits=Car+Make%3AAudi%7CModel%3AA6%7CC ars+Year%3A2007%7CPlat_Gen%3A4F2%2C+C6&hash=item27f72201f2:g:~IsAAOSwzrxUvoCY)
What size rim do you have at present?
2007 3.0tdi asb le mans
hybrid turbo, decat,miltek, 20's etc
330-350 bhp
450-500lbst
efunc
25-02-2016, 11:37 PM
Yes, I have them on my Golf, and about to fit them on my TT with 19" OEM TTRS Rotors. The spacers are H&R 8mm and 10mm. That will reduce the offset from ET52 to ET42. I could probably go to 12mm or even 15mm, but I'll try this first.
Lukenkarl
26-02-2016, 03:54 PM
Yes, I have them on my Golf, and about to fit them on my TT with 19" OEM TTRS Rotors. The spacers are H&R 8mm and 10mm. That will reduce the offset from ET52 to ET42. I could probably go to 12mm or even 15mm, but I'll try this first.Could you show pics before and after?
efunc
26-02-2016, 04:48 PM
Yes, will do. I'm still undecided which rims to fit though. I've got TTRS 19" Rotors which are 9J ET52 and A6 Le Mans 19" 7-spokes which are 8.5J ET48. I put 245 tyres on 9j ones and 235 on the 8.5j ones to stretch the tyre wall a bit to give a bit or arch clearance for spacing out.
efunc
25-01-2017, 07:33 PM
Sorry, I forgot to take the pics of the 8mm/10mm spacers. I've now fitted 10mm/12mm spacers and seem to have some rubbing on the front with 10mm. Very odd. Didn't happen until after a few months. And then only when the car has just been started and still cold. Don't notice it once warmed or at the end of a journey. I was going to fit 15mm all round (got the spacers in my shed waiting) but I think I'll hold off until I find the cause of the rubbing. Nothing strikes out visually...
Powered by vBulletin® Version 4.2.4 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.