Hill hold assist

[Sparky_143]

Hill hold assist
Hi all
is hill hold assist a retrofit option for the b8?
Is it just a case of installing the right switch and programming?
Is there any guides anywhere to help do this ?
cheers
john

[Guest 2]

Seek and ye shall find - How To Audi Hold Assist retrofit (http://www.vwaudiforum.co.uk/forum/showthread.php?133293-Audi-Hold-Assist-retrofit&highlight=Hill+hold+retrofit)

;)

[Sparky_143]

Bought a switch today for hill hold assist and looking through the above link and here
AudiEnthusiasts Hill Hold Assist Install (http://www.audienthusiasts.com/Project_HillHold.html)
i needed some additional wires and connectors.
are the part numbers in the links from Audi themselves or somewhere else and does anyone know cost of these
cheers

[Sparky_143]

Anyone know where to get these repair wires?
cheers

[Guest 2]

Audi parts department, less than £1 a wire.

[Sparky_143]

Successfully installed hill old assist today.
Really happy
not quite sure what's next. Any ideas.

[gdallas]

nice one. much did it cost in total and how long it take?

[Sparky_143]

nice one. much did it cost in total and how long it take?
It was about £35 for switch and wiring and took about 2 hours to do
there is a great guide on audi enthusiasts website.

[troc]

Successfully installed hill old assist today.
Really happy
not quite sure what's next. Any ideas.

You could work through some of the other retrofits on the audienthusiasts website :) Or if VERY brave (or rich), check out the same guy and his adventures here:

New 3G Plus MMI in 2010 Retrofit (http://www.audizine.com/forum/showthread.php/502060-New-3G-Plus-MMI-in-2010-Retrofit)

[ScottyUK]

Has anyone done this on a MY2010< car ?

I know you can get it now on Stop/Start card but you couldn't on the MY2010..... and I miss it !

[gregpot2000]

Does anyone know any businesses/installers that can fit this?

Sent from my GT-I9505 using Tapatalk 2