Help please

[Robin K-S]

Hi everyone,

I binned my Seat Inca yesterday, its looking like new wing, bonnet, bumper etc etc, you get the picture. Now I know the caddy bits fit, the bumper & grill are different, but wing & bonnet will fit. What I need to know do any Polo bits fit & if so which years, as I've seen a 90 something (Mk3) Polo in a breakers just round the corner & obviously that opens it up a lot on Ebay.

Basically I need to know if I can replace the bonnet & wing with parts from any other vehicles?

Cheers in advance for your help

[Robin K-S]

Right, there are differences, but none that are insurmountable. The bonnet's are a straight swap, the wing's however are not, as the bumpers are different. The main difference is on the Inca wing the front bit comes down more to make the lower part of the bumper/chin spoiler assembly, but if this is not damaged you can just cut if off & weld it to the Caddy wing. The front slam panel is also slightly different, but just a case of taking the extra bits off the Inca 1 (presuming they're not bent, mine weren't). I'm presuming the main differences are to do with the bumper differences & changes in the engine bay layout over years, but we managed to swap the front end between my 52 Inca & a W reg Caddy in around 4 hrs. Pics below