mylastpolo
15-08-2007, 08:44 PM
First off hi everyone, this is my first post. I drive, or did! a mk II 2.9 vr6, most of the work had been done when I bought it and I'm just trying to iron out a few problems, one being the indicator tell-tale lights (little arrows on the dash). A previous owner fitted a corrado dash (presumably when they fitted the engine) and the said lights don't work. On plug U2 on the fusebox there has been 2 wires snipped; black (pin 4) and green (pin 6), if I connect these wires the right dash light double flashes when off and flashes as normal when indicating right but also left! the left light never flashes.
There's a voltage (around 10v) from the clocks to both wires all the time but nothing from the fusebox. The flasher relay is new and otherwise working fine as are the LED's for the tell-tale lights as i've tested them.
If anyone has ANY idea or wiring diagrams for Corrado clocks it would be greatly appreciated.
The car by the way is a '90 spec 16v. Cheers.
There's a voltage (around 10v) from the clocks to both wires all the time but nothing from the fusebox. The flasher relay is new and otherwise working fine as are the LED's for the tell-tale lights as i've tested them.
If anyone has ANY idea or wiring diagrams for Corrado clocks it would be greatly appreciated.
The car by the way is a '90 spec 16v. Cheers.