Missing door rubber/bung

[Guest 2]

Noticed this this afternoon, I'm missing one of the covers on my nsf door

Could someone kindly supply a P/N or let me know where I could get one as I'm sure Audi would charge £££ for the pleasure

See pic compared to the osf
http://i816.photobucket.com/albums/zz90/57_audi/Everything%20Else/ff279ea2.png

[Sam]

It's the bung that covers the removal screw which holds the door lock/lock-blank in place.

It's more than likely a standard-across-the-range part which I think is 3B0837111B41. I can pop mine out at lunch (fnar!) to be sure though, I have access to an 06 Passat, an 02 A3 and an 03 Ibiza too so I can double-double check the bung is the same.

[Guest 2]

Thanks Sam,

The diameter of the bung would is 1.5cm so I guess anything with the same diameter would fit so a trip to the scrapyard would be easiest!

http://i816.photobucket.com/albums/zz90/57_audi/iPhone%20Uploads/a960e703.jpg

[Sam]

Hmm, not sure now.

Just measured mine (fnar!) and the hole is 15mm but the bung is 20mm and the p/n is 3B0837111B41 as per my post above.

With it removed I can see the torx head of the lock retaining bolt.

Can't get into the other cars until lunch though :(

If you pop the bung out from the other door, the p/n should be on the back.

[NHN]

TBH it may have been pushed into the door given your experience with audi thus far Chris :)

[Guest 2]

Hmm, not sure now.

Just measured mine (fnar!) and the hole is 15mm but the bung is 20mm and the p/n is 3B0837111B41 as per my post above.

With it removed I can see the torx head of the lock retaining bolt.

Can't get into the other cars until lunch though :(

If you pop the bung out from the other door, the p/n should be on the back.

I'll have a look and see, should it just lever/pop off?


TBH it may have been pushed into the door given your experience with audi thus far Chris :)

Ugh, don't remind me! My latest DPF troubles are persuading me ever more to trade 'er in for something else .. Any news on this new A3 being released yet?

[Sam]

I prised mine out with my finger on my old, hated car, but a flathead screwdriver should do it on your new, much loved car

[Guest 2]

much loved car

It's not loved unfortunately ;)

[Guest 2]

Ok got the screwdriver and tried to prise the drivers side bung off .. Didn't go quite to plan :(

Screwdriver slipped and ended up marking the inside of the door .. **** :(

Gave up after that!

http://img.tapatalk.com/5e0d8676-a43e-effe.jpg

To make matters even worse my dpf light returned AGAIN!

http://img.tapatalk.com/5e0d8676-a481-507c.jpg

[Sam]

My driver's door looks exactly the same :biglaugh: