PDA

View Full Version : Laminx-x install


rharris
08-10-2011, 08:54 AM
See below for revised image.

Just added to protect headlamps :). Looks great to me with the car colour.

Richard
neilos100
08-10-2011, 01:32 PM
Can you post a bigger picture....and put the right way round too? Cant really see it properly!
rharris
08-10-2011, 06:36 PM
Sorry, was trying to do it from an iPad!
jcdub
09-10-2011, 08:21 PM
I was looking at doing this with the subtle tint on my A6, not sure yet at I have the Led's too. There is suppose to be a 5% reduction in the brightness of the lights using this, but it looks great. I have it done on my girlfriends Octavia vRS and it looks great.

How did you find getting the film to fit at the top of the headlight under the front wing? tricky?

JC
rharris
09-10-2011, 08:42 PM
The tool supplied did a good job of letting me push the film up and under; I just left it a bit long so I could do that. I thought it was only the darkest tint that affected the brightness.
rharris
09-10-2011, 08:44 PM
"None of our light protection films change/adjust the beam pattern. Our GunSmoke light protection film can reduce light output in some cases."
jcdub
11-10-2011, 05:38 PM
The tool supplied did a good job of letting me push the film up and under; I just left it a bit long so I could do that. I thought it was only the darkest tint that affected the brightness.
I had seen a post before that the subtle tint was up to 5% reduction in light and up to 10% reduction in gun smoke....

What size sheet is needed per headlight?

Cheers

John