Led tail lights

[mrmarc]

Hi all
So i have just fitted led tail lights on my a4 and all though they work with out coding/adapting, warnings about bulbs been out in rear lights display on the dis. I have read a few threads about fitting led tail lights but not one of them actualy tells you how to code/adapt these tail lights. So my question is does any one know how to code/adapt these tail lights ?

Regards

[a8 tech]

yes thanks

long code changes in bem

or take it to the dealer and ask them to run svm 050 060

[ScottyUK]

A8 tech,

If I put LED indicators in to my otherwise LED rear cluster, could the bulb out alert in DIS also be removed by the dealer by running the same thing?

The only challenge I'd then have is finding amber LEDS with pins at 120degrees rather than opposite each other. *** did Audi do that! Grrrr.

[mrmarc]

Thanks a8 tech you would'nt happen to know the long code change as i did not want to go to the dealer as they want £138 for an hours labour.

[a8 tech]

Thanks a8 tech you would'nt happen to know the long code change as i did not want to go to the dealer as they want £138 for an hours labour.

2009 a4 saloon bem ok no need to replace as the correct part number fitted


I coded bem for rear led but still needed to svm as the bem needed updating from

svm update
sw 8K0907064C; 0145 -> 8K0907064C; 0146

46 - Convenience system central module:


before

8K0909501C; 0038; 0000000FCC3C555D


after

8K0909501C; 0039; 00000017B22BBE1D


better you go to the dealer and pay

[mrmarc]

Quick update. Got my led tail lights coded at audi today 62 pound for half hours labour and tail lights look great !