PDA

View Full Version : Audi 80 scan



a25c
01-12-2010, 08:43 PM
My buddy bought a 1992 80 2.0e engine code ABT recently so I did a scan and came back with this

Friday,26,November,2010,20:47:51:59214
VCDS Version: Release 10.6.0
Data version: 20100630



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 8C - Audi 80/S2 B4
Scan: 01 02 03 08 15 25

-------------------------------------------------------------------------------
Address 01: Engine Labels: None
Part No: 443 907 311 C
Component: 2,0l R4 MONO D21
VCID: 132E40DB4B1D

6 Faults Found:
00515 - Camshaft Position (Hall) Sensor (G40)
03-00 - No Signal
00516 - Closed Throttle (Idle) Position Switch (F60)
30-10 - Open or Short to Plus - Intermittent
00282 - Throttle Position Actuator (V60)
27-10 - Implausible Signal - Intermittent
00522 - Engine Coolant Temperature Sensor (G62)
30-10 - Open or Short to Plus - Intermittent
00522 - Engine Coolant Temperature Sensor (G62)
30-10 - Open or Short to Plus - Intermittent
00522 - Engine Coolant Temperature Sensor (G62)
27-10 - Implausible Signal - Intermittent
Readiness: N/A

End ---------------------------------------------------------------------

--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Address 01: DTCs cleared

Car is an absolute b**ch to start keeps turning over and over,is the hall sender located in the distributor?