PDA

View Full Version : Please Help interior and vanity lights not workin 97 audi a4



dazzel
12-10-2010, 06:37 PM
have changed all bulbs and fuses and still no joy can anyone help

Alan02
12-10-2010, 08:44 PM
I`m sure they`re intergrated with the alarm/C.L control unit in the boot. Does the C.Locking work ( Pump type unit).

dazzel
12-10-2010, 10:03 PM
hi alan the central locking and alarm are workin perfect

yaman
12-10-2010, 10:21 PM
Probably corroded wires and connections, under the
front passenger carpet, that lead to the ccm.

Make sure the drain under the battery tray is clear.

Regards
Jim

dazzel
12-10-2010, 10:47 PM
Probably corroded wires and connections, under the
front passenger carpet, that lead to the ccm.

Make sure the drain under the battery tray is clear.

Regards
Jim


thanx jim will have a look tomo after work

dazzel
15-10-2010, 06:19 PM
got rear lights to work and got power going to front ones but they wont work weird it was loose connection passenger side footwell wud it be the switches at fault

yaman
16-10-2010, 11:40 PM
Yeah, could be switches or bad earth.

Regards
Jim

dazzel
18-10-2010, 09:46 PM
earth wires all ok now the fuse keeps blowing not sure wot do next

yaman
18-10-2010, 10:08 PM
There's a fair chance that there is more corroded wires under
the carpet, front and rear passenger side, buried in a loom
and wrapped in tape, touching each other, so to speak :naughty:.

Some of these wires and joints turn green, which helps to
identify them.


Regards
Jim

Passatman2
18-10-2010, 10:51 PM
There's a fair chance that there is more corroded wires under
the carpet, front and rear passenger side, buried in a loom
and wrapped in tape, touching each other, so to speak :naughty:.

Some of these wires and joints turn green, which helps to
identify them.


Regards
Jim
I found the plug pins corroded too, be very very gentle if you are thinking of investigating as you can make things worse unless your prepared to sit with a soldering iron.

dazzel
28-10-2010, 10:38 PM
hey guys still no further on the fuse blows even when ignition off *** i go to put fuse in it blows even before i have it pushed in

dazzel
29-10-2010, 06:27 PM
got it sorted guys was passenger side vanity mirror wires had melted

yaman
29-10-2010, 06:42 PM
got it sorted guys was passenger side vanity mirror wires had melted

Does that mean someone really hot was using it? :naughty:

Regards
Jim

dazzel
03-11-2010, 11:11 PM
yea the wife lol do u know if i can fit auto dim mirror in my car mate

yaman
04-11-2010, 09:57 AM
yea the wife lol do u know if i can fit auto dim mirror in my car mate

Dont see why not.

http://www.parkingsensoronline.co.uk/adapter-gentex-mirror-fitting-p-287.html?osCsid=jcr9olf6qlot7u8ki5u8qqtej3

http://www.parkingsensoronline.co.uk/gentex-auto-dimming-rear-view-mirror-genk2-p-245.html?osCsid=jcr9olf6qlot7u8ki5u8qqtej3

Regards
Jim