steering wheel controls

[dark-snake]

Hello.
First Sorry for mistakes I'm french.
I have an audi a6 (chassis 4F) of 2005.
A have a Vag-com wire and the programm VCDS (908).
I have replaced my original steering wheel by a steering wheel with steering wheel controls.
I also bought the wire to connect the new steering wheel to the car at AUDI.
The problem is the fact that steering wheel controls doesn't work !
So I opened VCDS and I went on 16-Steering Wheel Electronics:

I change the original value 0 to 2:

* 0xx?xxx: Steering Wheel
o 0 = Standard Steering Wheel
o 1 = Sport Steering Wheel
o 2 = Multi-Function Steering Wheel

but after that the command does not work !
if anyone knows how to activate steering wheel controls?
Ask me if you want photos or more.
Thanks Thanks

[martin1810]

Please post a scan from an up to date version of VCDS when asking for help

[Issac Hunt]

Does VAGCOM accept or reject the new coding you're trying to enter?

If your car didnt have Multifunction from the factory then you might need a new steering ECU (SCSM) that will support multifunction control.

[bearthebruce]

As I said in the MKIV forum, if you have a genuine lead, upgrade to the latest version and do as Martin has asked - post a full autoscan. If you are running a Chinese rip-off, then you may have a problem with the lead itself communicating in a proper way during coding of a module. I also posted a link to the Steering Coding for your 4F platform (http://wiki.ross-tech.com/wiki/index.php/Audi_A6_%284F%29_Steering_Wheel_Electronics#Coding ) from the Ross-Tech Wiki.

[dark-snake]

Hello!
Yes VAGCOM accept the new coding.
But after acceptance Multifonctions still don't work
Yes my car haven't Multifonction from the factory.


<<If your car didnt have Multifunction from the factory then you might need a new steering ECU (SCSM) that will support multifunction control.>>
The ECU of an audi a6 wich has multifonction and a audi which hasn't it are different?

I'll post a scan soon

Thanks.