Phil Tur
08-09-2010, 10:54 AM
I thought someone would find this helpful
First you need to remove the electric window buttons, underneath the door handle facing the front you will see a small hole find a thin screwdriver and push it up at an angle towards the switches you will be able to lever the panel off carefully.
this reveals a screw that hold the panel on. Above the handle is a long piece of trim - this will slide off carefully with a bit of teasing again revealing some screws.
The other one is visible on the bottom of the door panel.
When all the screws are out you need a cloth on the floor to protect your trim. Gradually follow the trim where it meets the door and pull gently you will be able to ease it off and rest it on the floor.
First you need to remove the electric window buttons, underneath the door handle facing the front you will see a small hole find a thin screwdriver and push it up at an angle towards the switches you will be able to lever the panel off carefully.
this reveals a screw that hold the panel on. Above the handle is a long piece of trim - this will slide off carefully with a bit of teasing again revealing some screws.
The other one is visible on the bottom of the door panel.
When all the screws are out you need a cloth on the floor to protect your trim. Gradually follow the trim where it meets the door and pull gently you will be able to ease it off and rest it on the floor.