ardasaliah
09-06-2007, 04:55 PM
Hi can someone help?
I just bought a vag com USB cable with an ODB2 connector off ebay, http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=013&sspagename=STRK%3AMEWN%3AIT&viewitem=&item=230137809176&rd=1&rd=1
and am trying to connect it to vagcom 409.1, on my laptop. Once the drivers installed, it has installed as a serial port to com 2.
trouble is when I start vag com and do the test, it says port status is ok but "interface not found." I did the LED test as well that performs fine but the first test does not seem to connect.
I have set the cable in Device Manager as COM Port 2 and have chosen the same COM port in VAG COM but no joy.
There are no conflicts either in device manager
I have also tried it connected to the car with the ignition on but still no luck.
Help please
I just bought a vag com USB cable with an ODB2 connector off ebay, http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=013&sspagename=STRK%3AMEWN%3AIT&viewitem=&item=230137809176&rd=1&rd=1
and am trying to connect it to vagcom 409.1, on my laptop. Once the drivers installed, it has installed as a serial port to com 2.
trouble is when I start vag com and do the test, it says port status is ok but "interface not found." I did the LED test as well that performs fine but the first test does not seem to connect.
I have set the cable in Device Manager as COM Port 2 and have chosen the same COM port in VAG COM but no joy.
There are no conflicts either in device manager
I have also tried it connected to the car with the ignition on but still no luck.
Help please