hi,
yep me too, driving me
replaced siren already, as original was knacked.. infamous battery leakage all over PCB! new siren completely different in design.. PART # 8L0 951 605 A .... cost ~£100 ******* rip-off !
Anway got these codes after clearing / reseting etc.
-------------------------------------------------------------------------------
Address 35: Centr. Locks Labels: 4B0-962-258.lbl
Part No: 4B0 962 258 H
Component: Central Lock/Alarm D33
Coding: 05870
Shop #: WSC 02325
VCID: 2E5C8307C07F
1 Fault Found:
01370 - Alarm triggered by Interior Monitoring
35-00 - -
-------------------------------------------------------------------------------
Address 45: Inter. Monitor Labels: 4B0-951-173.lbl
Part No: 4B0 951 173
Component: Innenraumueberw. D03
Coding: 00002
Shop #: WSC 02325
VCID: E0C0AD3F4A2B
1 Fault Found:
01384 - Alarm triggered by Glass Breakage Sensor
35-00 - -
-------------------------------------------------------------------------------
alarm constantly going off after ~5mins after arming, even after disabling interior sensors.. doubt the actual sensors are faulty, more likely Wiring/Connectors from/to Ultrasonic Sensor Control Module, as per
http://wiki.ross-tech.com/wiki/index.php/01370
apparently, this is near the "alarm logo" in that corner behind the cloth trim of the pillar.. i'll let you know how i get on, or if any of you have any advice / experience please let us know..!
thanks