TT AfterMarket Radio Installation

[paulkelly1234]

Hi there,


I'm new here. I'm looking for any help that can be given. I'm trying to install an after-market bluetooth radio into my TT. The current radio is a Concert 4B0 035 186 P (which is now locked and I need a code for).





My predicament is that I don't know which wire goes where.
One part (I) has Orange/Brown, Orange/Purple, White, 2 Red/Brown, Red/Green and Blue/Green.





The next part (II) has Blue/White, Brown/White, Red/Brown and Red. I know that these are speaker wires.





The last part (III) has Brown/Grey, Grey/White, Red/White and Brown. I assumed these were my Power and Ground cables. But I just cannot figure out how to get power to my after-market radio.





I have been trying to figure this out for nearly two weeks now. This is the adapter I am using:





Can anyone please tell me what cable goes where or at the very least, point me in the right direction. If there is no hope of wiring it, can anyone help me get the radio-code to get my original Concert back working again. Any help at all would be greatly appreciated.

[Guest 2]

Audi with your registration document and ID will get your code.

There is a pinout on the top of the radio which you can use.

[paulkelly1234]

Hi Chris. Thanks a mill for the reply. I'll head over to my local dealer next week and get the code. The pinout was the first thing I tried to use, but I can't understand it at all.

DSC_0142.jpg

I've tried my best to read it, but I must be doing something wrong as there is no power going to the new radio.

[dragan75]

Toomorov i put pioneer bt and got bosse wofer it mus be reconected to be worked all things or just will work front spekers...

Sent from my GT-I9505