Fit the switch
connect vag com
goto address 17
open adaption channel 19 and set the channel for dis 1,2
goto address 16 and change the code to allow dis
* 0?xxx: Steering Wheel
o 0 = Standard (without Multifunction)
o 1 = 3-Spoke Steering Wheel (Sport Steering Wheel)
o 2 = Multifunction Steering Wheel with Radio Control
o 3 = Multifunction Steering Wheel with Radio/Telephone Control
o 4 = Multifunction Steering Wheel with Radio/Telephone/Voice Control
o 5 = Multifunction Steering Wheel with Radio/Voice Control
* 0x?xx: Options
o +1 = Tiptronic
* 0xx?x: Board Computer & Cruise Control
o 0 = Board Computer & Cruise Control not installed
o 1 = Board Computer installed
o 2 = Cruise Control installed
o 4 = Board Computer & Cruise Control installed
* 0xxx?: Rear Wiper (Chassis)
o 1 = Rear Wiper not installed (Sedan/Cabriolet)
o 2 = Rear Wiper installed (Avant
You also need to earth pin 1 of the dash to close the washer level circuit otherwise the washer level empty symbol will be shown on the dash all the time.
https://www.vwaudiforum.co.uk/forum/s...ad.php?t=52211