Hi guys

Using a mates vag-com 409.1 and cable he got from ebay (that seems to convert the usb to serial) to attempt to reset the throttle body on a 1998 MkIV Golf.

When I try to do the throttle body allignment, as detailed on the ross-tech site (Using group 098 as 060 doesn't exist), it either says ERROR immediately or comes up ADP RUN for 10 secs then says ERROR.

I'm getting really frustrated with it so hope someone can help.

The thoughts I've had on it are

1) The sample rate is usually about 1.3 - is this too low?
2) The following DTC comes up every now and again:
00282 Throttle Position Actuator
Not sure what it means but I clear it before trying the adaption
and it still doesn't work.
3) Do I need to login (11) perhaps?


Any advice you can give me would be greatly appreciated

Andy