Can you program out the front brake pad warning on the dash

[Strath44]

Hi folks, a long time back my brake pad sensor wire to car loom detached and the disc severed it on the car side of the loom.

This causes the low brake pad warning light to come on.

I've bridged the cable twice now to fix it but moisture has now tracked back up the cable and I no longer have enough cable to make a good circuit.

My mot is next week and I cant get the replacement loom in time.

Can I turn off the warning in the controller / computer? (I have rosstechs tool)

[Crasher]

Yes I think I have seen it in the coding table

[Strath44]

Thanks, it was in 17 - instruments then coding. Did exactly what I needed.
Rosstech has the coding help generator which is very useful!!