Hi. I am new to VCDS and plugged it in for the first time on Saturday. Today I get a fault 'adaptive light fault'. Most posts refer to module 55 which I do not seem to have. !! I have modules 29 and 39 for left and right light but there is no fault shown. Module 9 shows fault C107E Headlight Missing calibration / Basic setting. I took a complete scan on Saturday and the fault was not present then and the vehicle has not been driven until today when the fault appeared. Hopefully just a coincidence that I get this fault just after I have started to use it but struggling to see where to go from here. !!