Audi A6 saloon 3.0tdi quattro 272hp

[bluezie]

Can you post a total vehicle scan please? Sometime odd stuff happens in other modules, just need to rule that out. Ross-Tech won't answer any questions without a full scan for this reason - a classic example, is a faulty wheel speed sensor will light up the dashboard like a Christmas tree, and log fault codes in loads of different modules!
Obviously cut out personal details from the scan like reg. no. and VIN no.

Have you any scans form when this first happened, with the other faults?

[Yuri]

Hi. My vag com is russian made. Its exact same Ross Tech just in Russian language so will write all codes it comes up with after total scan.

[Yuri]

Anyway scanned car and found 2 fault codes. One is in the engine controle module P0675 00 [237] cylinder 5 glow plug electric circuit fault
Second fault code is in Module 5F, MMI unit,fault code is B1564 01[009]. Funny why it explains fault as mass air meter 1. Air mass flow too high. Strange.

Scanner i am using is genuine bit of kit that a lot of indy garages who work with VAG group cars use. Its same as Ross Tech with all features and you can do everything that a Ross Tech can. It is regestered and can be updated and is for unlimited vin's.

Would be interesting to see it tested by somebody who knows and owns real ross tech scanner to see if my bit of kit does the job.

[bluezie]

I don't understand this, the first code seems to be a generic OBD-II code, not a Audi specific code, but that only shows there is a fault somewhere from the control module and the glow plug inclusive. The second one makes no sense whatsoever. The MMI should never report an engine specific code, especially as the engine isn't reporting it as well!
I suspect your scan tool isn't working properly, or something is being badly lost in translation.

[Yuri]

Hi. Worked out mmi code,its something to do with antenna,but ecerything works as it should.

Glow plug fault code is correct though,isnt it?

[bluezie]

Glow plug circuit fault code is plausible, but it doesn't say what is faulty, could be the glow plug, wiring or controller.