allroad Brake Pressure Sensor.

[allroad-diaries]

Hi guys,

I don't stop in here much but I have an issue and thought I'd seek a wider audience.

A little while a go I had the Brake Pressure Sensor fault come up on my C5 allroad but only after a warm restart. As this sensor is built in to the ABS pump on allroads I bought a refurbished pump and module from BBA Reman and swapped them over but the strange thing is the module didn't fault as being from a different car and I didn't tell them my trans and brakes for it to have been coded in advance.
The sensor issue didn't show itself for a little while but it has returned and again only comes up after a warm restart.

I've done a full brake bleed to make sure that is all clean and good but I'm starting to think the problem is further down the line and it's actually the ECU that can't see the sensor, rather than it being faulty.

Have any of you had a similar experience?

Many thanks
Mick

[Crasher]

I gave up on any type of remanufactured controller years ago, BBA didn’t go bust for no reason...