EPB module wiring diagram/pinout

[VAG-Abound]

Sorry, yellow & purple is correct. May have mis-translated abbreviation "ge=gelb" when viewing.

[VAG-Abound]

Position 2 / white on the 30 pin connector is from the dash control unit. Try that one maybe?

[Dubspud]

So this is FIXED. Last week I got the current flow diags so I could trace the wires and disconnected one by one and tested each wire for shorts. Had none in the wiring. Then tested all the pins on the EPB module ign on and off. I then took coms wires out one by one and read codes. Still the same, short to +. So as canH and canL reading correct, starting with the lowest pin number, took lowest coms wire out which was pin 6 to ABS module and shorted to ground and tested codes, now had both short to+ and short to- on wake up line. Obviously not possible. Got a replacement EPB module and now it's all fixed. Thanks for your responses.