problem with Variable valve timing-maybe

[Veselin]

Hello,

thank you for wellcome.

I have problem with the power on car.Why VCDS say:Specification: "System not OK".

1 camshaft.jpg

camshaft rpm.jpg

[Veselin]

if the phaser gear is blocked, can it therefore spell it out "Syst.not Ok".

[VAG-Abound]

If you scan it are any faults logged?

[Veselin]

If you scan it are any faults logged?

Thanks for the reply.
That`s the problem no faults codes.And the car is sluggish from idle rev to high rev.
Only Check Engine Light and EPC are on when ignition on(engine is not running).
For me the problem is intake camshaft-but what kind is?

What is these 110.60 degrees?
They never change.

[Veselin]

or Timing chain is jumped 1 or 2 teeth.
For other thing I don`t remind.
Today i tested solenoid n205-it works(clicking).

You ?

[VAG-Abound]

Sorry, beyond my knowledge. There are other jumped belt threads though see if they help.

[Veselin]

Sorry, beyond my knowledge. There are other jumped belt threads though see if they help.

for jumped chain that I guessed,but maybe is not she.
Generally I have problem with the power of engine.If the chain is jumped-ECM says "wrong correlation".I don't have any fault codes.

Thank you for answers