Re: Shark fin removal a6 c7 2013 saloon –
05-11-2019,05:35 PM
You dont need to drop the complere head liner; Rear c pillar trims need to come off, Removing rear grab handles help, Possibly brake light on back screen too but not 100% sure as i dont have a saloon. Once these have been removed the head liner can be pulled down from its rear clips allowing you to contort your nimble body enough so that you can slide your arms in the gap and removed the fakra cables and the T30 iirc torx bolt and clamp.
Once this has been easily accomplished you can pull the aerial off the roof and inspect its poor design.
Remove the miniture torx screws and you can remove the outer painted cover and swap it to your new working one.
Reassembly is reversal if removal.
Eazee peezee
RS6 Performance Ascari Blue, Carbon Ceramics Brakes and lots more.
A6 BiTdi Avant MTM
Retrofitted: Full Led Headlights, DAB, Full Electric Seats, Surround View Cameras, Genuine RS6 Grille, RS6 Seats,Leather Door Armrests, Soft Close Doors, Rear Side Blinds,High Beam Assist, Eibach Springs, Led Roof Console, 4 Zone Climate, Rear Heated Seats, Head Up Display, Side assist, Alcantara Interior Retrim