Dual Dash Cam Installation

[Brownstone1892]

Hi guys, sorry for the delay in replying.

I had no success with the rear camera, it just killed the DAB as soon as it was powered on, regardless of where I positioned it. What a massive error on Audi's part. Do they not think people would like to install rear dash cams? Oh well, I'm happy with just the front for now, until someone works something out.

[gav28uk]

Have you tried using ferrite rings/sleeve near to the power outlet to the DashCam, as that will help suppress interference. When I initially installed my dashcam I lost all reception, FM and DAB due to interference. A ferrite ring sorted the issues for me.

[B5NUT]

I have the Audi front & rear dash cam's and have no problems with my DAB reception and did not have to use any additional ferrite's. The issue is all down the lack of emission testing by the manufacture of the dash cams, and not Audi's aerial amplifiers. As stated above get some ferrite's that covers the dab frequency range. I would get two place one as near to the rear camera as possible and the second at the start of the feed cable. Also you may have to do a second turn of the cable around the ferrite as the frequency range it can protect changes on the number of turns.