Swivel tow bar wiring loom supplier

[terry.hatton]

I have recently completed an installation of a second hand swivel tow bar. As part of the quest to do this myself and keep the costs down, I found a supplier of a bespoke made wiring loom for the job. This person is called Daniel Barton. bart5584@poczta.onet.pl He is based in Poland and has the following link on Youtube. Audi A6 C7 and A7 - towing hook electric instalation AHK, towbar - YouTube

The cost for the loom was PLN600 (Polish Zloty) Around £120 including delivery.

I thought I would share this with everyone as noone seem to know about it or didn't respond when I asked. I hope that this post will be useful to anyone undergoing this task in the future. Really good service and was made and delivered fast. I also purchased a Westfalia dedicated wiring kit from PF Jones as it was £130 which includes the correct module which is needed. I used the connectors from this loom for the "STOP" wire so that I did not have to cut into the cars existing wiring as the polish loom did not come with it.

You will only need the Polish loom if you want the LED to work on the release lever. If you are not bothered, then the Westfalia Kit will be all you need.

I hope this helps.

IMG_20190310_202732_1v2.jpg

[Donaciuks]

hello,
I bought original second hand swivel tow bar 13pin. I have Audi A6 2012 2.0 diesel S-line. i am wondering which control unit i need to buy. is it this one? Sucuri WebSite Firewall - Access Denied
Did you instal the same tow bar like in this pic below?
Thank you for your help.

s-l1600 copy.jpg

[terry.hatton]

Yes. That’s the same as I fitted. However you should buy the Westfalia kit as it comes with the correct module. Sucuri WebSite Firewall - Access Denied


Sent from my iPhone using Tapatalk