Hi all,
I need to fix/change the headlamp washer as the present one has developed a leak which I assume is due to the one way valve sticking open. As the washer bottle is higher than the headlamp washer I assume the water will run out if there was no one way valve. I sort of cured it in the summer by adding Viakal into the jet with a syringe, but as its leaking again, I need to remove the unit to clean it properly or to fit a new unit.
I looks like the washer jet unit clicks into a bumper fitting but I cannot see how to unclip it and don't want to break it.
Anyone here any ideas or have a diagram?
TIA
Stagnite