Hello all. I’m trying to find the ‘synchronous angle’ on VCDS, I’m stumped because on my engine (CFFB), some people seem to be able to access it, some can’t (dependant on Ecu I’ll assume)? Is their an alternative IDE (bleedin’ UDS protocol-horrible) I could check? Apologies for the inquisition, but I suspect my timing (crankshaft particularly) may be slightly out (slight rough idle when cold). I’m hoping I can check my timing via VCDS, before paying the same amount in labour again for TB to be checked & look up the wrong tree. Much appreciated, Mike.