Right,had a few problems with my steering,ESP and the yellow steering wheel light came on,occasionally making the steering quite heavy.This afternoon i had VCDS on it showing fault code 02546 and 00778.
Tried resetting them but they came straight back.
Ran the measuring block 7 and got the following.
Steering angle sensor stays at 0 when turning the wheel.
Steering angle speed goes up when turning the wheel.
Calibration status is ok.
I'm aware that pretty much nothing in life is certain,but is there anything i should try before buying a new sensor or is it pretty much guaranteed that changing it will resolve this problem ?
Thanks