Advanced (Direct) Tyre Pressure Monitoring System - Retrofit

[inchshort]

Hi madtrader,
im really happy with mine, I find I prefer to have this as my vc screen all the time watching it increase as I drive and the wheels warm up thus increasing in pressure and temperature.

If you don’t have vc you can see it on the MMI but only when stationary, but cars without vc do have the information display so you may be able to get it constantly displayed whilst driving.

Andy is a top bloke who will help you with that. I’ve had a few mods done by Andy which have all been superb retrofits and alot cheaper than going to a Audi retrofit workshop.

[andyhud007]

Hi Madtrader. I'll clear my inbox and pm you in a couple of hours.

We can make Tpms work on a non vc cluster too.

Thanks Inchshort for your kind words. Appreciated.

Andy.

[madtrader]

hi inchshort,andy : oh sh*t you guys reply so fast thank you very much.The price of Audi in my country is f*cking crazy but they have lacks of options....I tried to send you a pm but your inbox was full that's why

[ragebe]

I was just doing a quick search for tyre pressures, to see what everybody else uses - 37 psi for me - and this thread popped up. I might have to have a whirl at this one Andy, cracking stuff (as usual)

Sent from my SM-G965F using Tapatalk

[inchshort]

My car has just been in for a service I have the 22inch SQ7 wheels on, and they (Audi dealership) have reduced them to 33psi!, I had them on 37 psi previously. I’m not sure what to use!

[inchshort]

Obviously this has only become evident because of this mod as it’s difficult to tell a 5 psi shift just by looking at the tyre.

[ragebe]

I recently had the tyre-pressure warning pop up and upon reading the pressures, found one had dropped about 9 psi. That's quite a drop, hence thinking a positive monitoring would be better.

Best get on eBay and see what's available.

Sent from my SM-G965F using Tapatalk

[inchshort]

If you’re going oem then you need the module and 4 sensors installed in your wheel, module wires into can bus and coded. All parts available on eBay. Parts will cost you around £150.

[Jonh1969]

Andy - this looks fantastic. I would love this mod, I am in Scotland and guess you are in the south? So asking you to do this isn’t going to work. is it something I would be able to tackle myself, and if so (i would be happy to pay) would you be able to help me remotely? Finally, for the coding .... I have OBDeleven, will that work or would I need access to something a bit more industrial? Feel free to PM me if you’d prefer.

[rsg]

I got anAudi Q7 4M 2016 and i want to do retrofit TPMS just like you.
Please helpme to do this,which parts should i buy?And how to retrofit.
would yoube able to help me remotely? Finally, for the coding .... I have OBDeleven,will that work.