Hi all,

Am in the process of upgrading the Audi Delta stereo to a flip out screen one. A couple of questions that I'm hoping someone here may be able to help me with as this isn't as straight forward as I thought it'd be!

1. The stereo is either all on or all off. When testing normally, with the accessory power removed the screen is supposed to go down. However, in this it just stays up as the power is completely cut. Is there any way I could wire it so that it has a permanent power supply to the stereo when it's off so the screen will go down at least?

2. The stereo adaptors that I got do not seem to fit this model at all even though it was advertised for this make. Can someone point me in the right direction?

The current install has these gaps:
stereo.jpg

The adaptors I got just don't fit at all:
surround.jpg

surround2.jpg

If I put this in before sliding the stereo in, the stereo won't slide in. And then I can't fit them after the stereo is in (and before I put the stereo surround on).

Any advice would be greatly appreciated!!