3.0 tdi - help needed in identifying part in cooling system

[shib71]

good afternoon to everyone.

does anyone would be able to help me identify part ( name, number , anything really) of cooling system?
it is little plastic T pipe joint, on return , top of motor very close to EGR valve.
it broke today , close to home hopefully but around of half of coolant reservoir tank gone.

I am not sure but I have also noticed ( same time really) that my power steering become very stiff time to time , can this be related some how?

here is picture of broken part and location of it.

any help would be apriciated .
cheers
DSC01876.jpg

[L3g10n4rU]

059121086F if your cas has BMK, BNG or ASB engine code. If not, let me know your hassis number. The hose is for coolant return.
For problem of power steering check if the tank steering oil is at it’s level. Can’t be because of the coolant pipe.

Sent from my iPhone using Tapatalk

[Badong]

Try looking through the diagrams on here.
Online Audi spare parts catalogue, Europe market: Audi VIN decoder, aftermarket, etka online

Sent from my SM-G935F using Tapatalk

[shib71]

059121086F if your cas has BMK, BNG or ASB engine code. If not, let me know your hassis number. The hose is for coolant return.
For problem of power steering check if the tank steering oil is at it’s level. Can’t be because of the coolant pipe.

Sent from my iPhone using Tapatalk

thanks a loot for your help. that seems exactly like broken part. get this ordered tomorrow and then I will look on power steering system.

thanks a lot for your help.

[L3g10n4rU]

It’s ok mate. Order the clip that holds the T part on it’s hose too. You might need it in case yours brakes on dismantle.


Sent from my iPhone using Tapatalk

[2fquick]

This went on mine as well, noticed when driving the power steering was heavy, then steam when stopped.

The coolant gets on the serpentine belt causing it to slip, hence power steering pump is not being driven.

Once the belt is cleaned up the PS should be OK

[shib71]

That is exactly what happen with my car. Good to hear that as I was a little bit scared about that...
I have got this part ordered from audi garage, should be with me tonight. And honestly, it is only 11 quid for that

Few more problems to solve and I will enjoy my audi

Wysłane z mojego BLA-L09 przy użyciu Tapatalka

[swalker]

LOL this one only a few posts down...
part number not on etka?!?!

i ordered 2 of part 35 to re-attach worked out well.
being in manufacturing i recon the crimp style are added at engine assembly then the clamp added when the engine is added to the car, line balancing blah blah blah lol