Audi A6 highline clocks redline coding

[A6S]

Dare I say I’ll live with it?

Think it’s my limited knowledge of coding here as I cannot get the map to show in the display either


Sent from my iPhone using Tapatalk Pro

Did you retrofit the whole mmi/cluster or just the cluster? I think it’s driven from the mmi as that has the nvidia chipset

[sarah1331]

I just retrofitted the cluster and I have rmc that makes it harder for me to find a scan to copy and test


Sent from my iPhone using Tapatalk Pro

[sarah1331]

It’s definitely sent from the mmi over the fibre optic cable. But I add the FOC and the RMC shuts down


Sent from my iPhone using Tapatalk Pro

[A6S]

Here’s my coding. Exactly the same but I have a different revision and part number.
Address 17: Instruments (J285) Labels:| 4H0-920-xxx-17.clb
Part No SW: 4G8 920 986 M HW: 4G8 920 986 M
Component: TDieGb H11 0104
Revision: 07001088 Serial number: 658080915596059
Coding: 33AF0A000B412600010000
Shop #: WSC 02391 785 00200
ASAM Dataset: EV_RBD4K 004055
ROD: EV_RBD4K.rod
VCID: 4281A41BD5F11456DC-8016

[sarah1331]

Mine is exact same everything the post was from my old clocks but I copied the coding over it was set to avant before and still didn’t do it


Sent from my iPhone using Tapatalk Pro

[sarah1331]

A6s do you have rmc ? Or mmi?


Sent from my iPhone using Tapatalk Pro

[A6S]

A6s do you have rmc ? Or mmi?


Sent from my iPhone using Tapatalk Pro

I have the full tech pack with the mmi plus

[sarah1331]

Just had another look think engine temperature may be the problem

Does yours show

Sent from my iPhone using Tapatalk Pro

[ukgroucho]

Oil temp in lap timer only shows once it get to 60C and above.

[sarah1331]

Temp Started working now


Sent from my iPhone using Tapatalk Pro