I'm trying to install an aftermarket remote central locking system (from ebay) to a 2007 Polo 1.2 (I believe that makes it the 9N model type) and could really use some help...

I understand the unit needs to be wired into the Comfort Control Module situated under the steering column somewhere, and that a resistor (680R ??) needs to be installed in line with one of the trigger wires from the remote receiver/controller.

Does anyone have the pinout / connection diagram or wire colour codes for the wires going into the Polo's Comfort Control Module?

In particular I need to know how to locate the correct wires for:

* Battery +ve
* Ground
* Locking

And ideally one to trigger the flashing of the indicators too.

Any information or tips and tricks to doing this would be VERY much appreciated!

Thank you
Angus