AUDI A6 C6 2007 MMI 2G HIGH Flicker , strange lines

[Adel75]

​Have a MY07 A6 with MMI 2G High. Suddenly without any warning my screen has gone strange and blank. Have tried resetting but nothing works. Picture shows what it now looks like. Any thoughts?


Diag done no error in :

Address 07: Control Head Labels

but in Address 19: CAN Gateway Labels: 4L0-910-468.lbl

00470 - Data Bus for Comfort System


RUN

Control Module Part Number: 4L0 910 468
Component and/or Version: J533__Gateway H06 0040

Optical Bus Diagnostic : Standard

Controller Electrical Optical
19-CAN Gateway OK OK
07-Control Head(High/D3) OK OK
0E-Media Player 1 OK OK
47-Sound System OK OK
56-Radio OK OK

can someone help me pls

Thank u in advance

regards

Adel

[B5NUT]

Screen is faulty, there is no diagnostic to the screen, so you would not get any fault codes.

[Adel75]

Screen is faulty, there is no diagnostic to the screen, so you would not get any fault codes.

Thank u Mate , what s about the fault in the CAN gateway module :

ddress 07: Control Head Labels

but in Address 19: CAN Gateway Labels: 4L0-910-468.lbl

00470 - Data Bus for Comfort System

[Adel75]

Hi Mate s

found the issue , I replaced the monitor and things works fine now

regards

Adel

[Gunnark100]

Hi Mate s

found the issue , I replaced the monitor and things works fine now

regards

Adel

Good! Btw, you did not find the issue, B5NUT told you where issue is

[Adel75]

Hi Gunnrak ,

np ,Thank u and also Thanks to B5NUT
I suspect the cable as there is a TBS on it but it was not any way .
regards

Adel

Good! Btw, you did not find the issue, B5NUT told you where issue is