Seat connector pinouts - green connector, passenger occupancy

[helloportobello]

Hi guys,
I've just bought a B7 SE so far very happy with it however the previous owner was a mountain biker and would store his bikes in the car, so when I took ownership the whole of the back seats were caked in mud (and the fronts too).

I've managed to pickup a nice replacement set from an s-line (non leather) which was the same year as mine, these have heat and electric lumber.

I thought this would be plug and play, the drivers side slotted in with no issues but the passenger's side connectors are different. On my now removed seats I have a black connector (as per driver's side) on the passenger side. However the replacement seat comes with a red and green connector.

I'm not too concerned about the heat or lumber but I've heard the occupancy sensor is woven through the mat when you have heated seats and is contained within the green connector. I need to have the car in operation by next week for a 400 mile trip - so only have the weekend to get this sorted.

I've searched solidly (on my time off) for a whole week but can't find anything on these wires - can anyone provide a pinout so I can mate right wires from the green connect for occupancy to the black connector within my car - I don't want to trigger the airbag light or make the trip with it on.

Thanks...