My friend has mounted full electric sport seats on his C6 2008 which has ordinary seats with heating, no electric lumbal support, no nothing. So we looked at the installation connectors and found out that he has only two wires in old seats red connector which are used for footwell lighting apparently. My question is can we get +12V power and (-)ground from those two wires (pin 2 and 3) or we have to get it from somwhere else?

Here is the photo of red connector from these new seats on which you can see that has 2 thin wires in the middle and left and right are power and ground. My intention is to short connect wires 3 and 1, and 2 and 4 to get power for seats movement motors.

Red_connecetor.jpg