Accelerator position problem

[sambeattie94]

Hi guys

I have a 2010 A4 3.0 Tdi Quattro. I have been playing about on vcds and noticed my throttle position sensor only reads 78% on full throttle. I can get it to 80% by really standing on it.

Question is there a way to reset this. Iv searched the forums and tried the process of holding pedal down turning ignition on etc. Also can't seem to do it through the laptop.

Also on the image showing the part number of the pedal do the last 2 digits matter as I can find a lot on eBay with the same part number except the last 2 digits? Any help appreciated thanks


Sent from my iPhone using Tapatalk

[Alan02]

There's probably nothing wrong with your pedal sensor. Are you suffering any issues? Lack of power?

[sambeattie94]

There's probably nothing wrong with your pedal sensor. Are you suffering any issues? Lack of power?

Haven't noticed a loss in power although I was thinking the pedal has probably been like this since I bought the car. A friend has a 2015 leon so I tested it and it also only shows around 80% on full throttle so I'm guessing it's working fine. Only noticed it as I was playing about on the laptop and well if there's a way to go faster I'm always up for that lol


Sent from my iPhone using Tapatalk

[gregpot2000]

same on my car! I am just aware now if I really want to go for it to stamp on it!