Fusebox connector type (Dashcam)

[Damo77]

Good afternoon ladies and gents,

Hoping some of you may be able to help with getting the correct fusebox connector type (for Passat B8, not sure if it's the same in the Audi's) to wire up a dashcam?

I've just pre-ordered a "Thinkware F800" dashcam with a hardwire kit which will hopefully be arriving in August so just trying to get everything I need ahead of time ready for when it arrives.

This is the camera:
Screenshot_20170630-124859.jpg

Now I've seen and read a few threads on here where people have used a fusetap but I want to make the install look as genuine as possible and not be presented with ugly (in my opinion) looking crimped wires as soon as you open the fusebox panel.

Fusetap:
Screenshot_20170630-125344.jpg

So I have been trying to research and find the exact female terminal type that plugs into the back of the fusebox that i can put into a blank slot near one of the live bussbars people on here have been referring to but I've not been able to nail it down to an exact part number/type.
I bought a few different types from "Bold-Sport" in the hope that they may fit but they have not arrived yet so thought I'd ask if any of you fine people might be able to give me a definitive part number.

Terminals in question: Bold-Sport.com :: VW Connector Terminals
Screenshot_20170630-124041.jpg



According to their website these are the part numbers but I don't know which one I need??

1. The part number: N 907 647 01 (for canbus.... ) / 26AWG
2. The part number: N 103 361 05 (male) / 22AWG
3. The part number: N 103 358 07 (for eg. warning light, footwell light...) / 22AWG
4. The part number: N 103 190 05 (male) / 22AWG or 18AWG
5. The part number: N 906 845 05 (for eg. headunit power..) / 22AWG or 18AWG
6. The part number: N 907 326 03 / 18AWG

I hope that someone can help with my dilemma haha

Kind regards and many thanks in advance
Damo