Hi,

On my Audi B7 E8 2005 2.0TDI airbag module was replaced and now I have this error:



Chassis Type: 8E (8E - Audi A4/S4/RS4 B6/B7 (2001 > 2008))
Scan: 01 02 03 08 09 0F 11 15 16 17 18 25 36 37 45 46 55 56 57 65
67 69 75 76 77

VIN: WAUZZZ8E55A485946 Mileage: 210880km-131034miles
-------------------------------------------------------------------------------
Address 01: Engine Labels: 03G-906-016-BLB.clb
Part No SW: 03G 906 016 GN HW: 028 101 211 3
Component: R4 2,0L EDC G010SG 9618
Revision: 12345678 Serial number:
Coding: 0000072
Shop #: WSC 23108 141 82495
VCID: 75E18BB21C001CEA83-8020

No fault code found.
Readiness: 0 0 0 0 0
.
.
.
.

Address 15: Airbags Labels: 8E0-959-655-94.lbl
Part No SW: 8E0 959 655 G HW: 8E0 959 655 G
Component: Airbag 9.41 H10 3230
Revision: 91H10323 Serial number: 0036M002B0LM
Coding: 0034622
Shop #: WSC 06325 000 00000
VCID: 3B755D8A7AA48A9AB5-806E

Subsystem 1 - Serial number: 6332DRB400B2C693Q

Subsystem 2 - Serial number: 6342DRB400B4C98B$

Subsystem 3 - Serial number: 6352ARB4004613A8E

Subsystem 4 - Serial number: 6362ARB40048E037J

Subsystem 5 - Serial number: 63729RB4004B8078L

Subsystem 6 - Serial number: 63829RB4004B83EAY

1 Fault Found:
01794 - Control Module - Incorrect Chassis (VIN) Number
000 - - - Intermittent
Freeze Frame:
Fault Status: 00110000
Fault Priority: 2
Fault Frequency: 5
Reset counter: 99
Time Indication: 0

On VCDS data learning is proposed:
Channel 081: Vehicle Data Learning

To start the process for vehicle data (VIN) learning, enter/save 02905 as new value.

Did anyone try this out, will this work? Is it safe?