Needle sweep

[Rowley102]

Anyone successfully enabled the needle sweep function via Vag Com on a 2009 VW Golf GTI, enabled it myself and it wouldn't work. Wondering if it could be because its an earlier Mk6?

Also what other VAG COM mods is there to do on a mk6 gti golf?

Thanks in advance


2009 Golf GTI 2.0, Tornado Red, Engine code: CCZB, Manual, RCD 510, Custom 2.5" Turbo back Sports Cat Exhaust System with 4" slash cut tips, Ram-Air Oversized Induction, 225/40/18 Goodyear Eagle F1 Asymmetric 3s, Monza Shadow Alloys, Ferrodo DS2500 pads, braided lines, Millers Nano-drive 5W-40

[cheekeemonkey]

I did it on mine. (2009 GTD). Let me see if I can find the coding for you to check.

[cheekeemonkey]

I did it on mine. (2009 GTD). Let me see if I can find the coding for you to check.

Its in 17 - Instruments
10
select "staging" from the drop down menu
select "active"
save


you might need to exit the car, lock it and leave for a minute to let the programming take effect before it shows?


Apparently you need an "H" type cluster. Yours might be an older versions?

[Rowley102]

Its in 17 - Instruments
10
select "staging" from the drop down menu
select "active"
save


you might need to exit the car, lock it and leave for a minute to let the programming take effect before it shows?


Apparently you need an "H" type cluster. Yours might be an older versions?

Thanks, but I don't have a H cluster so cant do it with Vag com unfortunately


2009 Golf GTI 2.0, Tornado Red, Engine code: CCZB, Manual, RCD 510, Bluetooth, Heated leather seats, Cruise control, 225/40/18 Goodyear Eagle F1 Asymmetric 3s, Monza Shadow Alloys, Millers Nano-drive 5W-40

[cheekeemonkey]

That's a shame. TBH I don't tend notice them now !!