Hi,
I had the standard incorrect air flow message and it looked like on of the pipes had gone brittle and snapped. It's the pipe at the bottom of this pic:

IMG_0543.JPG

I removed it but noticed that the rubber T-piece which it connected too such houses the little one-way valve thing had a load of yellow gunk in it. Probably not doing the valve much good!

Any idea what it is? There's nothing in the oil, doesn't lose oil or water and temps ok.

Is this even anything to do with the sai or is it the oil breather??

Sorry for the silly questions!

Cheers


Sent from my iPhone using Tapatalk